Tsurumi’s small dewatering pump, the LB series, is designed for functions where space is tight, particularly construction. Secured by rope or chain, an LB can be used in applications which involve slender pipes, small tanks, deep pits and in distant places that are tough to reach with larger tools. The LB mannequin has a totally symmetrical design with no protruding parts, allowing it to be lowered to unknown depths with none risk of snagging. With pressure gauge วัด แรง ดัน น้ำ of only 187 mm, the pump’s round cross-section even matches into smaller filter pipes. There is also pressure gauge ออก หลัง with a water level sensor which is just some millimetres longer. The pump then controls itself routinely, switching on or off depending on the water degree. The LB presses water with dust particles up to 6 mm in measurement through the housing, allowing optimum cooling of the motor. The models within the series pump 225–440 l/minute and to a maximum of 17.5 m. The smallest model weighs around 10 kg dry, the biggest round 30 kg.
Share