Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the unfastened rock mass. เกจวัดแรงดันน้ำมันเครื่อง cannot exceed zero.2 mm.
Grouting pump operation and upkeep is easy, secure and dependable. This pump is utilized in mines working underneath tough situations as a end result of it’s dependable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it really works
Pneumatic stress in the air cylinder exerts a high stress on the grout combination which ends up in ejection of grout with a excessive stress and velocity. The valves of the air cylinder within the pump function routinely to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be driven even without Electrical energy provide in distant areas through the use of engine driven compressor.
Applications
The pump is majorly used in construction and mining trade for injecting material into extensive and medium measurement gap in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up etc. In mining business it is used to fill up cement answer the place there’s a gap exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, building basis, and different underground projects, and inflammable, explosive sites and different bad environment.
It has utility in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be utilized at any web site situation whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the final amount of the grouting volume is eight or10 instances of the amount at first. And the ultimate grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and circulate could be adjusted based on the necessities of grouting,(The flow of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electrical energy, development, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small size, excessive effectivity, dependable efficiency, pressure and circulate control, long life and so forth. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it might be carried easily. It is designed for straightforward operation and low maintenance. Last however not least its spare elements are easily obtainable.
Share